Juniper Networks J4350 - Manual (Page 139)

Configuring Secure Web Access
2. In the J-Web user interface, select Configuration>Quick
Configuration>Secure Access.
3. Enter information into the Secure Access Quick Configuration page, as
described in Table 39.
4. Click one of the following buttons:
To apply the configuration and stay on the Quick Configuration page,
click Apply.
To apply the configuration and return to the Quick Configuration page,
click OK.
To cancel your entries and return to the Quick Configuration page,
click Cancel.
5. To verify that Web access is enabled correctly, connect to the Services Router
using one of the following methods:
For HTTP access—In your Web browser, type http:// URL or http:// IP
address .
For HTTPS access—In your Web browser, type https:// URL or https:// IP
address .
For SSL JUNOScript access—A JUNOScript client such as JUNOScope is
required. For information about how to log in to JUNOScope, see the
JUNOScope Software User Guide.
6. To verify the secure Web access configuration, see “Verifying Secure Web
Access” on page 122.
Configuring Secure Web Access with Quick Configuration 119