Juniper Networks J4350 - Manual (Page 169)

Replacing and Troubleshooting Hardware Components
For more information about the command, see the JUNOS System Basics
and Services Command Reference.
7. Verify that the PIM status LED shines steadily green to confirm that the PIM
is online.
You can also verify correct PIM functioning by issuing the show chassis fpc
pic-status command described in the JUNOS System Basics and Services
Command Reference.
NOTE: In the show chassis fpc pic-status command, the PIM slot number is reported as
an FPC number and the PIM number (always 0) is reported as a PIC number.
Replacing the Compact Flash Disk
The primary compact flash drive is installed in a slot on the
Routing Engine (see Figure 41).
NOTE: Use only compact flash disks purchased from Juniper Networks for your
J-series platform and model.
Replacing Hardware Components 149