Juniper Networks J4350 - Manual (Page 36)

J4350 and J6350 Services Router Getting Started Guide
Figure 7: Front of J4350 and J6350 Chassis
ESD point
POWER
LED
STATUS
LED RESET CONFIG
button
Console
port Auxiliary
port LAN ports ALARM
LED HA
LED Power
button USB
ports
Physical Interface Modules (PIMs)
PORT 0 SERIAL PORT 1 STATUS STATUS PORT 0 SERIAL PORT 1 STATUS STATUS
g003804
The components of the front panel, from left to right, are described in the following
sections:
Physical Interface Modules (PIMs) on page 16
Power Button and POWER LED on page 17
STATUS LED on page 18
ALARM LED on page 18
HA LED on page 19
RESET CONFIG Button on page 19
Built-In Gigabit Ethernet Ports on page 19
Console Port on page 20
AUX Port on page 20
USB Port on page 20
Physical Interface Modules (PIMs)
Physical Interface Modules (PIMs) provide the physical connection to
various network media types. For information about individual PIMs,
see “Field-Replaceable PIMs” on page 29.
For pinouts of PIM cable connectors, see “Network Cable Specifications
and Connector Pinouts” on page 185. For PIM replacement instructions,
see “Replacing a PIM” on page 144.
16 J4350 and J6350 Services Router Hardware Features