Juniper Networks J4350 - Manual (Page 140)

J4350 and J6350 Services Router Getting Started Guide
Table 39: Secure Access Quick Configuration Summary
Field Function Your Action
Certificates
Certificates Displays digital certificates required for
SSL access to the Services Router.
Allows you to add and delete SSL
certificates.
For information about how to generate
an SSL certificate, see “Generating SSL
Certificates” on page 117.
To add a certificate:
1. Click Add. Opens the Add a Local
Certificate page.
2. Type a name in the Certificate
Name box—for example, new.
3. Paste the generated certificate and
RSA private key in the Certificate
box.
To delete a certificate, select it and click
Delete.
Enable HTTP Access
Enable HTTP Access Enables HTTP access on interfaces. To enable HTTP access, select the
Enable HTTP access check box.
Enable HTTP on All Interfaces Enables HTTP access on all interfaces
at one time. To enable HTTP access on all interfaces,
select the Enable HTTP on All
Interfaces check box.
HTTP-Enabled Interfaces Specifies interfaces on which you want
to enable HTTP access. Select and deselect interfaces by
clicking the direction arrows:
To enable HTTP access on an
interface, add the interface to
the HTTP Interfaces list.
To disable HTTP access on an
interface, add the interface to
the Logical Interfaces list.
HTTPS Web Access
Enable HTTPS Access Enables HTTPS access on interfaces. To enable HTTPS access, select the
Enable HTTPS access check box.
HTTPS Certificate Specifies SSL certificates to be used for
encryption.
This field is available only after you
have created an SSL certificate.
To specify the HTTPS certificate, select
a certificate from the HTTPS Certificate
list—for example, new.
Enable HTTPS on All Interfaces Enables HTTPS on all interfaces at one
time. To enable HTTPS on all interfaces, select
the Enable HTTPS on All Interfaces
check box.
120 Configuring Secure Web Access with Quick Configuration