Juniper Networks J4350 - Manual (Page 104)

J4350 and J6350 Services Router Getting Started Guide
2. Attach a screw to each rack rail in the third hole down from where you want
the top of the router to be positioned. Screw only part way in, leaving about ¼
in. (6 mm) distance between the screw head and the rail (see Figure 30).
Figure 30: Attaching Center Screw to the Rack
29
28
g003861
Rail
Screw
(placed in
center hole)
1RU (rack unit)
measurement
3. Lift the router and insert the larger elliptical openings in the mounting brackets
onto the partially inserted screws so that the router is hanging from the
two screws (see Figure 31).
Figure 31: Hanging the Router in the Rack
g003862
Rail
Center
screw
Front-mounting bracket
Elliptical-hanger cutout
Front view
4. Verify that the mounting screws on one side of the rack are aligned with the
mounting screws on the opposite side and that the router is level.
84 Installing a J4350 and J6350 Services Router