Juniper Networks J4350 - Manual (Page 247)

Safety and Regulatory Compliance Information
¡Atención! No usar una rampa inclinada más de 10 grados
Varning! Använd inte ramp med en lutning på mer än 10 grader.
Laser and LED Safety Guidelines and Warnings
Single-mode Physical Interface Modules (PIMs) are equipped with laser transmitters,
which are considered a Class 1 Laser Product by the U.S. Food and Drug
Administration, and are evaluated as a Class 1 Laser Product per EN 60825–1 +A11
+A2 requirements.
Observe the following guidelines and warnings:
General Laser Safety Guidelines on page 227
Class 1 Laser Product Warning on page 227
Class 1 LED Product Warning on page 228
Laser Beam Warning on page 229
Radiation from Open Port Apertures Warning on page 230
General Laser Safety Guidelines
When working around PIMs, observe the following safety guidelines
to prevent eye injury:
Do not look into unterminated ports or at fibers that connect to unknown
sources.
Do not examine unterminated optical ports with optical instruments.
Avoid direct exposure to the beam.
WARNING: Unterminated optical connectors can emit invisible laser radiation.
The lens in the human eye focuses all the laser power on the retina, so focusing
the eye directly on a laser source—even a low-power laser—could permanently
damage the eye.
Class 1 Laser Product Warning
WARNING: Class 1 laser product.
Safety Guidelines and Warnings 227