Intel SE7525GP2 - Manual (Page 87)

Intel® Server Board SE7320SP2 & Intel Server Board SE7525GP2 TPS System BIOS
Revision 2.0 87
Secure Mode Hot
Key (Ctrl-Alt- ) [L]
[Z]
Key assigned to invoke the
secure mode feature. Cannot be
enabled unless at least one
password is enabled. Can be
disabled by entering a new key
followed by a backspace or by
entering delete. This node is grayed out if a user
password is not installed.
Secure Mode Boot Disabled
Enabled When enabled, allows the host
system to complete the boot
process without a password. The
keyboard will remain locked until
a password is entered. A
password is required to boot from
diskette. This node is grayed out if a user
password is not installed.
Front Panel Switch
Inhibit Disabled
Enabled When disabled, allows the use of
Front Panel Switch. When
enabled, inhibits Power Switch
and Reset Switch button.
Disables the Power Switch and
the Reset Switch when Secure
mode is activated. This node is grayed out if a
password is not installed or if the
AC Policy is set to “Stays Off.”
NMI Control Disabled
Enabled Enable / disable NMI control for
the front panel NMI button.
4.4.5 Server Menu
Table 39. BIOS Setup, Server Menu Selections
Feature Options Help Text Description
System management N/A N/A Selects submenu.
Serial Console Features N/A N/A Selects submenu.
Event Log configuration N/A Configures event logging. Selects submenu.
Assert NMI on SERR Disabled
Enabled If enabled, NMI is generated on
SERR and logged.
Assert NMI on PERR Disabled
Enabled If enabled, NMI is generated.
SERR option needs to be
enabled to activate this option. Grayed out if “NMI on
SERR” is disabled.
Resume on AC Power
Loss Stays Off
Power On
Determines the mode of
operation if a power loss occurs.
Stays off, the system will remain
off once power is restored.
Power On, boots the system
after power is restored. When set to “Stays Off,”
“Front Panel Switch
Inhibit” is disabled.
FRB-2 Policy Retry on Next Boot
Disable FRB2 Timer
This controls action if the boot
processor will be disabled or not.
Late POST Timeout Disabled
5 minutes
10 minutes
15 minutes
20 minutes This controls the time limit for
add-in card detection. The
system is reset on timeout.