Intel SE7525GP2 - Manual (Page 79)

Intel® Server Board SE7320SP2 & Intel Server Board SE7525GP2 TPS System BIOS
Revision 2.0 79
Table 25. BIOS Setup, IDE Device Configuration Sub-menu Selections
Feature Options Help Text Description
Primary/Secondary/Third/Fourth IDE Master/Slave
Device N/A N/A Display detected device info
Vendor N/A N/A. Display IDE device vendor.
Size N/A N/A Display IDE DISK size.
LBA Mode N/A N/A Display LBA Mode
Block Mode N/A N/A Display Block Mode
PIO Mode N/A N/A Display PIO Mode
Async DMA N/A N/A Display Async DMA mode
Ultra DMA N/A N/A Display Ultra DMA mode.
S.M.A.R.T. N/A N/A Display S.M.A.R.T. support.
Type Not Installed
Auto
CDROM
ARMD Select the type of device
connected to the system. The Auto setting should work in
most cases.
LBA/Large Mode Disabled
Auto Disabled: Disables LBA Mode.
Auto: Enabled LBA Mode if the
device supports it and the device is
not already formatted with LBA
Mode disabled. The Auto setting should work in
most cases.
Block (Multi-Sector
Transfer) Mode Disabled
Auto Disabled: The Data transfer from
and to the device occurs one
sector at a time.
Auto: The data transfer from and
to the device occurs multiple
sectors at a time if the device
supports it. The Auto setting should work in
most cases.
PIO Mode Auto
0
1
2
3
4 Select PIO Mode. The Auto setting should work in
most cases.
DMA Mode Auto
SWDMA0-0
SWDMA0-1
SWDMA0-2
MWDMA0-0
MWDMA0-1
MWDMA0-2
UWDMA0-0
UWDMA0-1
UWDMA0-2
UWDMA0-3
UWDMA0-4
UWDMA0-5 Select DMA Mode.
Auto :Auto detected
SWDMA :SinglewordDMAn
MWDMA :MultiwordDMAn
UWDMA :UltraDMAn The Auto setting should work in
most cases.
S.M.A.R.T. Auto
Disabled
Enabled Self-Monitoring, Analysis and
Reporting Technology. The Auto setting should work in
most cases.
32Bit Data Transfer Disabled
Enabled Enable/Disable 32-bit Data
Transfer