Intel SE7525GP2 - Manual (Page 83)

Intel® Server Board SE7320SP2 & Intel Server Board SE7525GP2 TPS System BIOS
Revision 2.0 83
4.4.2.8 Memory Configuration Sub-menu
This sub-menu provides information about the DIMMs detected by the BIOS. The DIMM
number is printed on the server board next to each device.
Table 31. BIOS Setup, Memory Configuration Sub-menu Selections
Feature Options Help Text Description
System Memory Settings
DIMM 1A Installed
Not Installed
Disabled
Spare Informational display.
DIMM 1B Installed
Not Installed
Disabled
Spare Informational display.
DIMM 2A Installed
Not Installed
Disabled
Spare Informational display.
DIMM 2B Installed
Not Installed
Disabled
Spare Informational display.
Extended Memory Test 1 MB
1 KB
Every Location
Disabled Settings for extended memory
test
Memory Retest Disabled
Enabled If "Enabled", BIOS will activate
and retest all DIMMs on the next
system boot.
This option will automatically
reset to "Disabled" on the next
system boot.
Memory Remap Feature Disabled
Enabled
Enable: Allow remapping of
overlapped PCI memory above
the total physical memory.
Disable: Do not allow remapping
of memory.
Memory Sparing Disabled
Spare Disabled provides the most
memory space. Sparing reserves
memory to replace failures. Grayed out if the installed
DIMM configuration does
not support it.