Intel SE7525GP2 - Manual (Page 111)

Intel® Server Board SE7320SP2 & Intel Server Board SE7525GP2 TPS Platform Management
Revision 2.0 111
For more information on read-write through SMBus refer the System Management Bus (SMBus)
Specification 2.0.
5.2.5.5 LAN Interface
The server board supports one DPC LAN interface via a UDP port 26Fh. The mBMC supports a
maximum of one simultaneous session across all authenticated channels. The server board
implements gratuitous ARP support according to the IPMI 1.5 Specification.
The IPMI Specification v1.5 defines how IPMI messages, encapsulated in RMCP packet format,
can be sent to and from the mBMC. This capability allows a remote console application to
access the mBMC and perform the following operations:
• Chassis Control, e.g., get chassis status, reset chassis, power-up chassis, power-down
chassis
• Get system sensor readings
• Get and Set system boot options
• Get Field Replaceable Unit (FRU) information
• Get System Event Log (SEL) entries
• Get Sensor Data Records (SDR)
• Set Platform Event Filtering (PEF)
• Set LAN configurations
In addition, the mBMC supports LAN alerting in the form of SNMP traps that conform to the IPMI
Platform Event Trap (PET) format.
Table 47: LAN Channel Capacity
LAN CHANNEL Capability Options
Number of Sessions 1
Number of Users 1
User Name NULL (anonymous)
User Password Configurable
Privilege Levels User, Operator, Administrator
Authentication Types MD5
Number of LAN Alert Destinations 1
Address Resolution Protocol (ARP) Gratuitous ARP