Intel SE7525GP2 - Manual (Page 17)

Intel® Server Board SE7320SP2 & Intel Server Board SE7525GP2 TPS Introduction
Revision 2.0 17
1. Introduction
This Technical Product Specification (TPS) provides detail to the architecture and feature set of
the Intel
® Server Board SE7320SP2 and the Intel Server Board SE7525GP2.
The target audience for this document is anyone wishing to obtain more in depth detail of the
server board than what is generally made available in the board’s Users Guide. It is a technical
document meant to assist people with understanding and learning more about the specific
features of the board.
This is one of several technical documents available for this server board. All of the functional
sub-systems that make up the board are described in this document. However, certain low level
detail of specific sub-systems is not included. Design level information for specific sub-systems
can be obtained by ordering the External Product Specification (EPS) for a given sub-system.
The EPS documents available for this server board include the following:
o SE7320SP2 BIOS EPS
o SE7320SP2 Baseboard Management Controller (BMC) Firmware EPS
o Mini-Baseboard Management Controller (mBMC) Core EPS
These documents are not made publicly available and must be ordered by your local Intel
representative.
1.1 Chapter Outline
This document is divided into the following chapters
Chapter 1 – Introduction
Chapter 2 – Server Board Overview
Chapter 3 – Functional Architecture
Chapter 4 – System BIOS
Chapter 5 – Platform Management
Chapter 6 – Error Reporting and Handling
Chapter 7 – Connector Definitions and Pin-Outs
Chapter 8 – General Specifications
Chapter 9 – Product Regulatory Compliance
Appendix A – Integration and Usage Tips
Appendix B – Glossary of Terms