Intel SE7525GP2 - Manual (Page 81)

Intel® Server Board SE7320SP2 & Intel Server Board SE7525GP2 TPS System BIOS
Revision 2.0 81
USB 2.0 Controller Disabled
Enabled N/A
USB 2.0 Controller
mode FullSpeed
HiSpeed Configures the USB 2.0 controller in HiSpeed
(480Mbps) or FullSpeed (12Mbps).
USB Mass Storage
Device
Configuration N/A Configure the USB Mass Storage Class
Devices. Selects submenu
with USB Device
enable.
4.4.2.6 USB Mass Storage Device Configuration Sub-menu
Table 29. BIOS Setup, USB Mass Storage Device Configuration Sub-menu Selections
Feature Options Help Text Description
USB Mass Storage Device Configuration
USB Mass Storage
Reset Delay
10 Sec
20 Sec
30 Sec
40 Sec Number of seconds POST waits for the USB
mass storage device after start unit command.
Device #1 N/A N/A Only displayed if a
device is detected,
includes a DeviceID
string returned by the
USB device.
Emulation Type Auto
Floppy
Forced
FDD
Hard Disk
CDROM If Auto, USB devices less than 530MB will be
emulated as Floppy and remaining as hard
drive. Forced FDD option can be used to force
a HDD formatted drive to boot as FDD (Ex. ZIP
drive).
Device #n N/A N/A Only displayed if a
device is detected,
includes a DeviceID
string returned by the
USB device.
Emulation Type Auto
Floppy
Forced
FDD
Hard Disk
CDROM If Auto, USB devices less than 530MB will be
emulated as Floppy and remaining as hard
drive. Forced FDD option can be used to force
a HDD formatted drive to boot as FDD (Ex. ZIP
drive).