ICP DAS USA MSM-6226 User Manual
Page 59
Publication date: March., 2011
Revision A1
47
To enable or disable the DHCP Relay function on the Switch, Default is
“Disable”.
DHCP Relay Lifetime:
Use to set the default lifetime for which a prefix delegated by this DHCP
local server is valid. This default is overridden by an interface-specific
lifetime. Default is “5” sec.
DHCP Relay Agent Information Option 82 state:
Enables the system to insert the DHCP relay agent information option 82
in forwarded BOOT REQUEST messages to a DHCP server.
Default is “Disable” sec.
DHCP Relay Agent Information Option 82 Policy:
A DHCP relay agent may receive a message from another DHCP relay
agent that already contains relay information. If this behavior is not
suitable for your network, you can use the command “Replace, keep ,
Drop” to change it.
Default is “Keep” sec.
Server Port:
To evoke which port will enable the DHCP Relay Agent service.
Server IP:
To set the DHCP Server IP address.