ICP DAS USA MSM-6226 - Manual (Page 192)

: 1 to 26
: 1-10, default is 2
Example:
FEL2P-SW26 (802.1x)# set reAuthMax 2 2
set reAuthPeriod
Syntax:
set reAuthPeriod
Description:
A constant that defines a nonzero number of seconds between periodic
reauthentication of the supplicant.
Argument:
: syntax 1,5-7, available from 1 to 26
: timer, range 1-65535
Possible value:
: 1 to 26
: 1-65535, default is 3600
Example:
FEL2P-SW26 (802.1x)# set reAuthPeriod 2 3600
set serverTimeout
Syntax:
set serverTimeout
Description:
A timer used by the Backend Authentication state machine in order to determine
timeout conditions in the exchanges between the Authenticator and the Supplicant
or Authentication Server. The initial value of this timer is either suppTimeout or
serverTimeout, as determined by the operation of the Backend Authentication state
machine.
Argument:
: syntax 1,5-7, available from 1 to 26
: timer, range 1-65535
Possible value:
: 1 to 26
: 1-65535, default is 30
Example:
FEL2P-SW26 (802.1x)# set serverTimeout 2 30
set state
Syntax:
set state g Server>
Description:
To configure the settings related with 802.1X Radius Server.
Argument:
: the IP address of Radius Server, and the IP format is xxx.xxx.xxx.xxx
: the service port of Radius Server(Authorization port),
range 1~65535
: set up the value of secret-key, and the length of secret-key is