ICP DAS USA MSM-6226 - Manual (Page 213)

Publication date: March., 2011
Revision A1
201
Syntax:
cable
Description:
To enable cable diagnostic function on switch
Argument:
: syntax: 1,5-7, available from 1 to 26
Possible value:
: 1 to 26.
Example:
FEL2P-SW26(diag)# cable 1-5
port 1: cable Ok (2 pairs, length +/- 10 meters)
pair A Ok, length 10 meters
pair B Ok, length 10 meters
diag
Syntax:
diag
Description:
Diag is used to test whether EEPROM, UART, DRAM and Flash is normal or not.
Argument:
None.
Possible value:
None.
Example:
FEL2P-SW26 (diag)# diag
EEPROM Test : OK
UART Test : OK
DRAM Test : OK
Flash Test : OK
Loopback
Syntax:
loopback
Description:
For Internal/External Loopback Test.
Argument:
None.
Possible value:
None.
Example:
FEL2P-SW26(diag)# loopback
Internal Loopback Test : OK
External Loopback Test : Port 2 3 4 6 8 9 10 11 12 13 14 15 16 17 18 19 20
21 22 23 24 25 26 Fail