ICP DAS USA MSM-6226 User Manual
Page 147
Publication date: March., 2011
Revision A1
135
Email Configuration
Function description:
Alarm configuration is used to configure the persons who should receive the
alarm message via either email. It depends on your settings. An email address
has to be set in the web page of alarm configuration (See Fig. 3-49). Then,
user can read the trap information from the email. This function provides 6
email addresses. The 21 different trap events will be sent out to SNMP
Manager when trap event occurs. After ticking trap events, you can fill in your
desired email addresses. Then, please click
alarm configuration. It will take effect in a few seconds.
Fig. 3-56
Parameter description:
Email:
Mail Server: the IP address of the server transferring your email.
Username: your username on the mail server.
Password: your password on the mail server.
Email Address 1 – 6: email address that would like to receive the
alarm message.