ICP DAS USA MSM-6226 - Manual (Page 271)

Publication date: March., 2011
Revision A1
259
Description:
To enable the function of STP.
Argument:
None.
Possible value:
None.
Example:
FEL2P-SW26 (stp)# enable
set config
Syntax:
set config
Description:
To set up the parameters of STP.
Argument:
: priority must be a multiple of 4096,available from 0 to 61440.
: available from 1 to 10.
: available from 6 to 40.
: available from 4 to 30.
Note: 2*(Forward Delay -1) >= Max Age
Max Age >= 2*(Hello Time +1)
Possible value:
: 0 to 61440.
: 1 to 10.
: 6 to 40.
: 4 to 30.
Example:
FEL2P-SW26 (stp)# set config 61440 2 20 15
set port
Syntax:
set port
Description:
To set up the port information of STP.
Argument:
: syntax 1,5-7, available from 1 to 26
: 0, 1-200000000. The value zero means auto status
: priority must be a multiple of 16, available from 0 to 240
: Admin Edge Port,
: Admin point to point,
Possible value:
:1 to 26 : 0, 1-200000000.
: 0 to 240 : yes / no
: auto / true / false
Example:
FEL2P-SW26 (stp)# set port 1-16 0 128 yes auto