ICP DAS USA MSM-6226 - Manual (Page 230)

set specqry-count
Syntax:
set specqry-count
Description:
To set specific query count function on switch
Argument:
: from 1 to 10 value.
Possible value:
: from 1 to 10 value.
Example:
FEL2P-SW26(multicast)# set specqry-count 5
set specqry-response
Syntax:
set specqry-response
Description:
To set specific query max response time on switch.
Argument:
: from 1 to 10 value.
Possible value:
: 1 to 10.
Example:
FEL2P-SW26(multicast)# set specqry-response 2
Specific Query Max Response Time must less than Specific Query Timeout
FEL2P-SW26(multicast)# set specqry-response 1
set specqry-timeout
Syntax:
set specqry-timeout
Description:
To set specific query timeout on switch.
Argument:
: from 1 to 30 value.
Possible value:
: 1 to 30.
Example:
FEL2P-SW26(multicast)# set specqry-timeout 20
FEL2P-SW26(multicast)# show igmp-setting
IGMP Snooping : Enable
Unregister Multicast Flooding : Enable
General Query Interval : 20
General Query Max Response Time : 5
General Query Timeout : 15
Specific Query Count : 5
Specific Query Max Response Time : 1
Specific Query Timeout : 20
Port Multicast Group Limit IGMP Router