ICP DAS USA MSM-6226 - Manual (Page 270)

Description:
The Show here is to display the configuration of SNMP.
Argument:
None.
Possible value:
None.
Example:
FEL2P-SW26 (snmp)# show
SNMP : Enable
Get Community: public
Set Community: private [Enable]
Trap Host 1 IP Address: 192.168.1.1 Port: 162 Community: public
Trap Host 2 IP Address: 0.0.0.0 Port: 162 Community: public
Trap Host 3 IP Address: 0.0.0.0 Port: 162 Community: public
Trap Host 4 IP Address: 0.0.0.0 Port: 162 Community: public
Trap Host 5 IP Address: 0.0.0.0 Port: 162 Community: public
Trap Host 6 IP Address: 0.0.0.0 Port: 162 Community: public
stp
MCheck
Syntax:
MCheck
Description:
To force the port to transmit RST BPDUs.
Argument:
: syntax 1,5-7, available from 1 to 26
Possible value:
: 1 to 26
Example:
FEL2P-SW26 (stp)# Mcheck 1-8
disable
Syntax:
disable
Description:
To disable the function of STP.
Argument:
None.
Possible value:
None.
Example:
FEL2P-SW26 (stp)# disable
enable
Syntax:
enable