ICP DAS USA MSM-6226 - Manual (Page 256)

9
10
11
12
13
……
set flow-control
Syntax:
set flow-control
Description:
To set up the flow control function of all ports.
Argument:
:port range, syntax 1,5-7, available from 1 to 26
: set its flow control as symmetric
: set its flow control as asymmetric
Possible value:
: 1 to 26
:symmetric or asymmetric
Example:
FEL2P-SW26 (port)# set flow-control 3-6 asymmetric
set speed-duplex
Syntax:
set speed-duplex |[<10|100|1000> ]
Description:
To set up the speed and duplex of all ports.
Argument:
:port range, syntax 1,5-7, available from 1 to 26
:
auto : set auto-negotiation mode
10 : set speed to 10M
100 : set speed to 100M
1000 : set speed to 1000M
:
half : set to half duplex
full : set to full duplex
Possible value:
: 1 to 26
: auto, 10, 100, 1000
: full, half
Example:
FEL2P-SW26(port)# set speed-duplex 10-15 10 full
FEL2P-SW26(port)# show status
asymmetric: set
5 TP Up Enable Enable 100M/Full ON OFF
6 TP Down Enable Enable ----/---- ---- ---- Engineer
7 TP Down Enable Enable ----/---- ---- ----
8 TP Down Enable Enable ----/---- ---- ---- sales