Milan Technology MIL-SM2401MAF - Manual (Page 47)

39
long each of the
listening and
learning states last
before the port
begins forwarding.
Use the no form of
this command to
return to the default
value.
stp-path-priority
[number]
Interface
configuration
mode
Use the
spanning-tree
port-priority
interface
configuration
command to
configure a port
priority that is used
when two switches
tie for position as
the root switch. Use
the no form of this
command to return
to the default value.
128
Switch (config)#
interface
fastEthernet 0/2
Switch (config-if)#
stp-path-priority
127
QOS Commands Set
Commands
Command
Level
Description Defaults Example