Milan Technology MIL-SM2401MAF - Manual (Page 115)

107
UPS information display
I/P Volt.: display the current value, minimum, and maximum value of UPS input
voltage.
O/P Volt.: display the current value, minimum, and maximum value of UPS output
voltage.
Frequency: display the frequency value of UPS.
Bty. Cap.: display the battery capacity of UPS.
Overload: display the overload capacity of UPS.
Temperat.: display the current temperature of UPS.
UPS commands
Command Description
[1] Test for 10 seconds
UPS will perform the self test for 10
seconds
UPS information display area UPS command setting area