Milan Technology MIL-SM2401MAF - Manual (Page 148)

140
7. To set the outgoing frames are VLAN-Tagged frames or untagged. Then click
Apply .
Tag: outgoing frames with VLAN-Tagged.
Untag: outgoing frames without VLAN-Tagged.
Port VID: Configure port VID settings
1. VLAN ID: set the port VLAN ID that will be assigned to untagged traffic on a given
port. This feature is useful for accommodating devices that you want to participate in
the VLAN but that don’t support tagging. The switch each port allows user to set one
VLAN ID, the range is 1~255, default VLAN ID is 1. The VLAN ID must as same as
the VLAN ID that the port belong to VLAN group, or the untagged traffic will be
dropped.
2. Ingress Filtering: Ingress filtering lets frames belonging to a specific VLAN to be
forwarded if the port belongs to that VLAN.
Enable: Forward only packets with VID matching this port's configured VID.
Disable: Disable Ingress filter function