Milan Technology MIL-SM2401MAF - Manual (Page 167)

159
POE Status Interface
Power Management: Enabling or disabling the POE power management
function.
Firmware: display the system firmware version.
Total Power Limit: Set limit value of the total POE port provided power to the
PDs.
Total Power (W): total of all the port power that provided to PD.
Port: select the port that you want to configure from the drag down menu in the
bottom of the interface.
Enable: enable or disable the port status.
Power Limit by Classification: Enabling or disabling power classification
function.
Power Limit by Management: Enabling or disabling the port power limit
management for POE power management.
Detect Legacy Signature: The legacy detection is to identify the PD devices
that did not follow the IEEE 802.3af standard their unique electrical signatures in
order for the PoE switch can provide the power to those PD devices.
Priority: Set port priority for the POE power management. 1 = C (critical), 2 = H