Milan Technology MIL-SM2401MAF User Manual
Page 178
170
Pin Number
Assignment
1
Tx+
2
Tx-
3
Rx+
6
Rx-
Note: “+” and “-” signs represent the polarity of the wires that make up each wire pair.
All ports on this switch support automatic MDI/MDI-X operation, you can use
straight-through cables for all network connections to PCs or servers, or to other switches
or hubs. In straight-through cable, pins 1, 2, 3, and 6, at one end of the cable, are
connected straight through to pins 1, 2, 3 and 6 at the other end of the cable. The table
below shows the 10BASE-T/ 100BASE-TX MDI and MDI-X port pin outs.
Pin MDI-X
Signal Name
MDI Signal Name
1
Receive Data plus (RD+)
Transmit Data plus (TD+)
2
Receive Data minus (RD-)
Transmit Data minus (TD-)
3
Transmit Data plus (TD+)
Receive Data plus (RD+)
6
Transmit Data minus (TD-)
Receive Data minus (RD-)
6475 City West Pkwy
Eden Prairie, MN 55344
Tel.: +1.952.941.7600