Milan Technology MIL-SM2401MAF - Manual (Page 163)

155
TFTP Restore Configuration
You can restore EEPROM value from TFTP server, but you must put back image in TFTP
server, switch will download back flash image.
1. TFTP Server IP Address: fill in the TFTP server IP.
2. Restore File Name: fill in the correct restore file name.
3. Click Apply .
TFTP Restore Configuration interface
TFTP Backup Configuration
You can save current EEPROM value from the switch to TFTP server, then go to the
TFTP restore configuration page to restore the EEPROM value.
1. TFTP Server IP Address: fill in the TFTP server IP.
2. Backup File Name: fill the file name.
3. Click Apply .