Milan Technology MIL-SM2401MAF - Manual (Page 141)

133
same VLAN members. Basically, creating a VLAN from a switch is logically equivalent of
reconnecting a group of network devices to another Layer 2 switch. However, all the
network devices are still plug into the same switch physically.
The switch supports port-based, 802.1Q (tagged-based) and protocol-base VLAN in web
management page. In the default configuration, VLAN support is “disable”.
[Note] In order to make an effective change to a VLAN mode, you have to reboot the
switch to apply new settings.