Milan Technology MIL-SM2401MAF - Manual (Page 128)

120
In Switch setting, it has three parts of setting – Basic, Advance, and Misc Config. We will
describe the configure detail in following.
Basic
In Basic switch setting, it displays the switch basic information.
System Name: the name of switch.
System Location: the switch physical location.
System Description: the description of switch.
Firmware Version: the switch’s firmware version.
Kernel Version: the kernel software version.
Hardware version: the switch hardware version.
MAC Address: the unique hardware address assigned by manufacturer (default)
Module: the module information, if the switch doesn’t install the module, then this
column will be no any information.
Switch basic setting interface
Advanced