Milan Technology MIL-SM2401MAF - Manual (Page 30)

22
system
location
[word]
Global
configuration
mode
Set switch system
location string
Switch (config)#
system location
xxx
system
description
[word]
Global
configuration
mode
Set switch system
description string
Switch (config)#
system
description xxx
system
contact [word]
Global
configuration
mode
Set switch system
contact window string
Switch (config)#
system contact
xxx
ip address
[IP-address]
[subnet-mask
] [ gateway]
Global
configuration
mode
Use the ip address
interface configuration
command to set an IP
address for a switch.
Use the no form of this
command to remove
an IP address or to
disable IP processing.
Switch (config)#
ip address
192.168.1.1
255.255.255.0
192.168.1.254
write
[memory|
terminal]
Privileged
EXEC
The “write memory” is
save configuration
and the “write
terminal” is show all
configuration.
Switch#
write
memeory
Update NVRAM
to Flash Complete
Switch# write
terminal
reload
Global
configuration
mode
Halt and perform a
cold restart
Switch (config)#
reload