Milan Technology MIL-SM2401MAF - Manual (Page 157)

149
SNTP Configuration
You can configure the SNTP (Simple Network Time Protocol) settings. The SNTP allows
you to synchronize switch clocks in the Internet.
SNTP Client: enable or disable SNTP function to get the time from the SNTP server.
UTC Timezone: set the switch location time zone.
Server IP: set the SNTP server IP address.
SNTP Configuration Interface
802.1X Configuration
When enabling the IEEE 802.1X function, you can configure the parameters of this
function. To enable the IEEE 802.1X function, go to Administrator Switch Setting
Misc Config.
System Configuration
1. Radius Server IP: set the Radius Server IP address.