Milan Technology MIL-SM2401MAF - Manual (Page 45)

37
switch does not
receive a bridge
protocol
data unit (BPDU)
message from the
root switch within
this interval, it
recomputes the
Spanning Tree
Protocol (STP)
topology. Use the
no form of this
command to return
to the default
interval.
spanning-tree
hello-time
[seconds]
Global
configuration
mode
Use the
spanning-tree
hello-time global
configuration
command to specify
the interval
between hello
bridge protocol data
units (BPDUs). Use
the no form of this
command to return
to the default
interval.
2 sec.
Switch (config)#
spanning-tree
hello-time 3