Milan Technology MIL-SM2401MAF - Manual (Page 33)

25
Use the duplex
configuration
command to specify
the duplex mode of
operation for Fast
Ethernet.
Auto
Switch (config)#
interface
fastEthernet 0/1
Switch (config-if)#
duplex full
duplex [full |
half| auto]
Interface
configuration
mode
Use the duplex
configuration
command to specify
the duplex mode of
operation for module
Ethernet.
Auto
Switch (config)#
interface
moduleEthernet
1/1
Switch (config-if)#
duplex full
speed
[10 | 100 | auto]
Interface
configuration
mode
Use the speed
configuration
command to specify
the speed mode of
operation for Fast
Ethernet.
Auto
Switch (config)#
interface
fastEthernet 0/1
Switch (config-if)#
speed 10
speed [10| 100 |
1000 | auto]
Interface
configuration
mode
Use the speed
configuration
command to specify
the speed mode of
operation for module
Ethernet.
The 100Base-FX
module only
supported for speed
100
Switch (config)#
interface
fastEthernet 1/2
Switch (config-if)#
speed 1000