Milan Technology MIL-SM2401MAF - Manual (Page 149)

141
3. Acceptable Frame type:
ALL: Acceptable all Packet
Tag Only: Only packet with match VLAN ID can be permission to go through the
port.
4. Click Apply .
802.1q VLAN – Port VLAN ID interface
Spanning Tree
The Spanning-Tree Protocol (STP) is a standardized method (IEEE 802.1d) for avoiding
loops in switched networks. When STP enabled, to ensure that only one path at a time is
active between any two nodes on the network. We are recommended that you enable
STP on all switches ensures a single active path on the network.