Milan Technology MIL-SM2401MAF - Manual (Page 146)

138
Basic
1. Click Add button.
802.1q VLAN –Add interface
2. Group Name: assign a name for the new VLAN.
3. VLAN ID: fill in a VLAN ID (between 2-4094). The default is 1.
4. Protocol VLAN: choose the protocol type. Default is NONE.
5. From the Available ports box, select ports to add to the switch and click Add button.
If the trunk groups exist, you can see it in here (ex: TRK1, TRK2…), and you can
configure it is the member of the VLAN or not.