MITSUBISHI ELECTRIC FR-S520 - Manual (Page 142)

133
2
2
.15 Parameter Unit (FR-PU04) Setting
When the optional parameter unit (FR-PU04) is connected to the RS-485 connector
of the inverter, you can make the environment setting of the parameter unit.
CAUTION
When the parameter unit (FR-PU04) is used, operation from the operation panel is
not accepted. (The stop key (
STOP
RESET
key) is valid)
2
.15.1 Parameter unit display language switching
By setting the communication parameter n13 "PU display language switching",
you can switch the display language of the parameter unit to another.
Parameter Name
Factory
Setting
version>
Setting
Range
Remarks
n13 (145) PU display language
0
<1>
0 to 7 Setting is enabled when Pr. 30 = "1"
The parameter number in parentheses is the one for use of the parameter unit (FR-PU04).
n13 Setting Display Language
0 Japanese
1 English
2 German
3 French
4 Spanish
5 Italian
6 Swedish
7 Finish
2
.15.2 Buzzer sound control
By setting the communication parameter n14 "PU buzzer sound control", you can
control "beep" produced when any of the parameter unit (FR-PU04) keys is
operated.
Parameter Name
Factory
Setting
Setting
Range
Remarks
n14 (990)
PU buzzer sound
control
1 0, 1
0: Without sound
1: With sound (factory setting)
Setting is enabled when Pr. 30 = "1"
The parameter number in parentheses is the one for use of the parameter unit (FR-PU04).