FARGO electronic HDPii - Manual (Page 95)

RESTRICTED USE ONLY Fargo Electronics, Inc.
HDPii High Definition Card Printer/Encoder User Guide (Rev. 1.1) 5-22
Troubleshooting with the Printer Error Message Table (continued)
Printer Error
Message Cause Solution
Flipper Jam The Flipper Table has
jammed while either
aligning itself or flipping a
card. a. Open the Printer's Output
Module Cover.
b. Clear any cards in the Output
Module by using the Forward
and/or Back buttons located on
the Printer’s Front Cover.
c. Ensure that the Flipper Table
can rotate freely. Close the
Printer's Output Module Cover.
d. Press the Resume button on the
Printer’s Front Cover to continue
printing.
e. To cancel the print, press the
Cancel Print button from the
Driver's display dialog.
No Flipper The Printer does not have
flipping capabilities. a. Verify the Printer has flipper
capabilities via the LCD Menu.
b. If Output capabilities are
present, ensure that the Print
Both Sides option in the driver
is set correctly.
c. Press the Resume button on the
Printer’s Front Cover to continue
printing.
d. To cancel the print, press the
Cancel Print button from the
Driver’s display dialog or press
the Cancel button located on
the Printer's LCD display.