Additional procedures, Accessing the ethernet status leds, Reviewing the led table – FARGO electronic HDPii User Manual
Page 168: Additional procedures -56, Accessing the ethernet status leds -56, Reviewing the led table -56
RESTRICTED USE ONLY
Fargo Electronics, Inc.
HDPii High Definition Card Printer/Encoder User Guide (Rev. 1.1)
6-56
Using the Help page
The Help page displays the Help information.
Step Procedure
1
Open this web page at the appropriate location by clicking on the Help book
icon at the top of each page. See previous page.
2
Review the web interface for the Ethernet-enabled Printer.
Additional Procedures
Accessing the Ethernet Status LEDs
The Ethernet Status LEDs can be found on the back of Printers.
Reviewing the LED Table
LED
Flash Rate
Indicates
On
The Network link is present.
Green LED
(Left)
Off
The Network link is not present.
Off
There is NO network traffic to this IP address.
Amber LED
(Right)
Blinking
There is Network traffic to this IP address.