Process flow (in table format), Reviewing the boot-up sequence, Process flow (in table format) -3 – FARGO electronic HDPii User Manual
Page 11: Reviewing the boot-up sequence -3
RESTRICTED USE ONLY
Fargo Electronics, Inc.
HDPii High Definition Card Printer/Encoder User Guide (Rev. 1.1)
1-3
Process Flow (in table format)
Reviewing the Boot-up Sequence
Step Process
1
The Card feed stepper turns ON (to check for a card in the card path).
2
The Film transfer take-up Motor turns ON to take up any slack in the film.
3
The Print Headlift turns until head up position is returned from Headlift
Sensor.
4
The Print Ribbon moves forward until it finds the yellow panel, pauses,
advances to magenta, then backs up to yellow (the Ribbon Sensor detects
the color of the ribbon).
5
The Transfer Film advances forward two panels from supply (advances until
the Print Film Sensor senses 2 marks on the Film).
6
The Transfer Film advances forward one panel from supply (advances until
the Print Film Sensor senses 1 mark on the Film).
7
The Transfer Film reverses for one panel onto supply (reverses until the Print
Film Sensor senses 1 mark on the Film).
8
The Transfer Film reverses for one panel onto supply (reverses until the Print
Film Sensor senses 1 mark on the Film).