FARGO electronic HDPii - Manual (Page 27)

RESTRICTED USE ONLY Fargo Electronics, Inc.
HDPii High Definition Card Printer/Encoder User Guide (Rev. 1.1) 2-14
Technical Specifications (continued)
Term Description
Print Speed -
Batch Mode Print Speed - Batch Mode:
•
38 seconds per card / 95 cards per hour (YMC with transfer)*
•
46 seconds per card / 78 cards per hour (YMCK with transfer)*
•
70 seconds per card / 51 cards per hour (YMCKK with
transfer)*
•
70 seconds per card / 48 cards per hour (YMCKI with transfer)*
Print speed indicates an approximate print speed. It is measured
from the time a card feeds into the Printer until the time it ejects
from the Printer.
Print speeds do not include encoding time or the time needed for
the PC to process the image.
Process time is dependent on the size of the file, the CPU, amount
of RAM and the amount of available resources at the time of the
print.
Resolution 300 dpi (11.8 dots/mm)
Single Wire USB
2.0 Encoding
Options • ISO Magnetic Stripe Encoding, dual high- and low-coercivity,
Tracks 1, 2 and 3
• Contactless Smart Card Encoder (HID iClass and MIFARE)
• Contact Smart Card Encoder reads from and writes to all
ISO7816-1/2/3/4 memory and microprocessor smart cards (T=0,
T=1) as well as synchronous cards
• Prox Card Reader (HID read-only)
Software Drivers Windows® 2000 / XP / Server 2003
Continued on the next page