Saving addresses, Resetting passwords, Saving addresses -61 – FARGO electronic HDPii User Manual
Page 173: Resetting passwords -61
RESTRICTED USE ONLY
Fargo Electronics, Inc.
HDPii High Definition Card Printer/Encoder User Guide (Rev. 1.1)
6-61
Saving addresses
Step Procedure.
Accessing the Network Setup Menu procedure to access the
Network Settings menu:
Options -> MENU -> Next -> Network Settings
2 Select
Next on the LCD to view the Save Addresses menu entry.
3 Press
the
Select button to save the current network settings (IP address,
GW, SN Mask) as the stored settings which will be used when automatic
address assignment using DHCP is disabled.
Resetting Passwords
Step Procedure
Accessing the Network Setup Menu procedure to access the
Network Settings menu:
Options -> Menu -> Next -> Network Settings
2 Select
Next on the LCD to view the Reset Passwords menu entry.
3 Press
the
Select button to reset the User passwords to the default settings of
empty strings.
(Note: This can be used when the passwords are not known.)