Reviewing the telnet command table (continued) – FARGO electronic HDPii User Manual
Page 119
RESTRICTED USE ONLY
Fargo Electronics, Inc.
HDPii High Definition Card Printer/Encoder User Guide (Rev. 1.1)
6-7
Reviewing the Telnet Command Table (continued)
Telnet Command
Command Purpose
Command Format
all
Display all information about this
Printer.
list all
diff
Display all differences between
current and stored network
settings.
list diff
uptime
Display how long since the
interface was last reset.
list uptime
sysinfo
Display information about the
Printer (e.g., model, label, contact,
location, Firmware version and
date, and serial number).
list sysinfo
ribbon
Display information about the
installed Ribbon in the Printer.
list ribbon
net
Display information about the
current network settings of the
Ethernet interface.
list net
stored
net
Display information about the
stored network settings of the
Ethernet interface.
list stored net
default net
Display information about the
default network settings of the
Ethernet interface.
list default net
list
user
Display information about the
defined User names and their type
(root or guest privileges).
list user