FARGO electronic HDPii - Manual (Page 248)

RESTRICTED USE ONLY Fargo Electronics, Inc.
HDPii High Definition Card Printer/Encoder User Guide (Rev. 1.1) 7-61
Using the Encoding Mode dropdown
Use the Encoding Mode option to specify which magnetic encoding standard to use. This
will change the encoding mode and coercivity setting or modify the ISO standards for Tracks
1, 2 and 3, by correctly modifying these Magnetic Encoding options. One of four modes can
be selected by this Encoding Mode dropdown:
• ISO
Encoding
• Custom
Encoding
• Raw
Binary Encoding
• JIS II Encoding
Category Description
ISO Encoding
selection (active and
inactive functions) If you select ISO Encoding, you send down a formatted set of
characters. (Note: This selection activates the track tabs. However,
all functions on the Track tabs are inactive/gray and display ISO
defaults, which are the defaults listed for each track below. The
Shift Data Left check box remains unchecked and inactive.)