FARGO electronic HDPii - Manual (Page 363)

RESTRICTED USE ONLY Fargo Electronics, Inc.
HDPii High Definition Card Printer/Encoder User Guide (Rev. 1.1) 16-16
Glossary of Terms (continued)
Term Definition
Resolution The number of individual pixels in a graphic, taken over a given
length, used to indicate the sharpness of the picture and the level
of detail. The number of elements in the Printhead determines
Fargo Printer resolution.
RFI (Radio
Frequency
Interference) Electromagnetic waves radiated by poorly shielded cables or
electronic devices that interfere with the operation or data transfer
of another device.
RFID (Radio
Frequency
Identification) This is a way of transmitting information via radio frequency. Data
is sent from an RFID transceiver to an RFID tag (that is
embedded in a Resin Ribbon).
RGB
(Red/Green/Blue) The three primary colors of the luminance or additive, model.
Combinations of these three colors can produce practically all the
colors of the spectrum that humans can detect. Computer
monitors operate on an RGB model.
Ribbon The dye impregnated film that is used for color printing.
Ribbon cable Parallel wires held flat in a row by plastic insulation.
RMA number (Return
Merchandise
Authorization
number) A number, acquired from Technical Support, which authorizes the
return of merchandise for repair or credit.
Roller Elements of the Printer used for the transport of media consisting
of a rotating steel shaft (for Ribbon) or a rotating steel shaft with a
rubber cylinder installed at the shaft midpoint (for moving cards).
RS-232 An interface standard, established in 1969 by the Electronic
Industries Association, regarding the connecting of computer
peripherals.
Continued on the next page