FARGO electronic HDPii User Manual
Page 212
RESTRICTED USE ONLY
Fargo Electronics, Inc.
HDPii High Definition Card Printer/Encoder User Guide (Rev. 1.1)
7-25
Detecting Supplies at Print Time Function (continued)
Step Procedure
3
When the Supplies checkbox is checked, the following takes place:
•
Ribbon and Film Type dropdown boxes are inactive and populated with
values of installed supplies. Dual Sided and Options are set to defaults
for detected supplies.
•
For example, no Dual Side options are available when no Output is
installed. This function provides automatic detection of an installed
feature whether it is automatically detecting supplies or not.
•
Before the Driver initiates each job, it retrieves the consumables values
from the Firmware.
•
If no Printer is found or no Ribbon is installed, the checkbox is allowed to
be checked. (Note: The previously-chosen Ribbon and Film values will
remain. You will see an error message.)
•
Activating the Device Options tab automatically repopulates the Ribbon
and Film types. (Note: You will see an error message if no Printer found
when activating the Device Options tab.)