FARGO electronic HDPii - Manual (Page 26)

RESTRICTED USE ONLY Fargo Electronics, Inc.
HDPii High Definition Card Printer/Encoder User Guide (Rev. 1.1) 2-13
Technical Specifications (continued)
Term Description
Print Area Over-the-edge on CR-80 cards.
Printing Method HDP™ Dye-Sublimation / Resin Thermal Transfer
Print Ribbon
Options Prints or Images:
• Full color, YMC*, 750 prints
• Full color with resin black, YMCK*, 500 prints
• Full color with two resin black Panels, YMCKK*, 500 prints
• Full color YMC with resin black and heat seal panel for difficult-
to-print surfaces, YMCKH*, 500 prints
• Full Color/Inhibit, YMCI**, 500 prints
• Full Color/Resin Black/Inhibit, YMCKI**, 500 prints
• Full Color/2 Resin Black/2 Inhibit, YMCKIKI**, 350 prints
*Indicates the Ribbon type and the number of Ribbon panels printed
where Y=Yellow, M=Magenta, C=Cyan, K=Resin Black, H=Heat
Seal, and I=Inhibit.
**The Inhibit or I designation under YMCI, YMCKI, and YMCKIKI
indicates the ability to prevent the transfer of film to the card
surface. Users can select these Ribbon types to prevent film from
transferring over security features, signature panel or other areas of
special interest on the card surface.
Continued on the next page