FARGO electronic HDPii - Manual (Page 321)

RESTRICTED USE ONLY Fargo Electronics, Inc.
HDPii High Definition Card Printer/Encoder User Guide (Rev. 1.1) 11-1
Section 11: Fargo Workbench Printer
Utility
Using the Inhibit Panel (HDPii)
The Inhibit Panel (I designation under YMCI, YMCKI, and YMCKIKI) allows definition of
areas on the surface of the card that will prevent the transfer of film to the card surface.
• When Active: This feature is active when using the Ribbons (I designation under YMCI,
YMCKI, and YMCKIKI).
• Two Approaches: You can either use the Fargo Workbench Printer Utility or an
approved application to access and work with the Inhibit Panel.
Using Inhibit Panel (via the Fargo Workbench Printer Utility)
You can use the Fargo Workbench Printer Utility to generate an Inhibit Panel Layout. (Note:
This utility allows the operator to add a rectangular area(s) defining which areas are to be
inhibited.)
• Inhibit Panel Placement: Each print job (generated from that individual client
workstation) will generate the instructions within the print job that place the corresponding
area(s) on the I-panel.
• Operating Systems: This method works on all applications generating print jobs to the
HDPii under all operating systems. (Note: This is regardless of whether the printer (being
used) is a shared instance from another workstation or an instance local to that particular
workstation.)
To create an inhibit area using the Fargo Workbench Printer Utility, see Using the Inhibit
Panel Layout Applet in the help file associated with the application.
Continued on next page