FARGO electronic HDPii - Manual (Page 21)

RESTRICTED USE ONLY Fargo Electronics, Inc.
HDPii High Definition Card Printer/Encoder User Guide (Rev. 1.1) 2-8
Technical Specifications (continued)
Term Description
Card Sizes
(Accepted
Standard sizes) (See Card tab under Printer Adjustments):
• CR-80: This selection is the default form size for the Printer.
This will print a 2.125 in. W x 3.370 in. L (54mm W x 85.6mm L)
image including a .04 over-bleed on each of the 4 sides.
• CR-80 (default values): Card Size supported is 2.204 in. W X
3.452 in. L (56mm W X 87.7 mm L).
Standard Card Size in inches (Printer Driver > Card tab)
Standard Card Size in mm (Printer Driver > Card tab)