2 operating the cursor – Furuno GP-3500F User Manual
Page 37
2. PLOTTER AND PILOT DISPLAY DESCRIPTION
2-7
2.2
Operating the Cursor
1. Press the [CURSOR ON/OFF] key.
The cursor is turned on, and the cursor appears at the own ship’s position. To
hide the cursor, press the [CURSOR ON/OFF] key again.
FISH
000001
43
20
21
22
TRKS HOLD
2003. 4. 1
34 43.1447'N
135 21.0758'E 350.2
T
9.9
kt
00:01
Cursor
Cursor position in L/L
PLOTTER NAV INFO 1 display (appearing the cursor)
2. Operate the trackball.
The cursor moves in the direction the trackball is operated and the cursor
position is indicated at the top of the screen.
Note:
The chart display moves in the opposite direction when it reaches an edge
of the screen.
To return the cursor to the screen center
▪
Press the [CENTER] key to return the cursor to the screen center.
See also other documents in the category Furuno GPS receiver:
- MARINE RADAR 1953C (100 pages)
- GP-1650D (2 pages)
- GP-1650WD (96 pages)
- GP-1650W (96 pages)
- NAVNET 1943C-BB (92 pages)
- GD-3300 (137 pages)
- DUAL GPS GP-150-DUAL (130 pages)
- GP-1650WF (113 pages)
- CH-300 (124 pages)
- NX-300 (65 pages)
- NX-300 (2 pages)
- GP-1850WDF (115 pages)
- GP-3500 (192 pages)
- GP-1850WD (44 pages)
- GP-1850W (98 pages)
- GP-1850WD (98 pages)
- GP-1850W (4 pages)
- GP-1850W (98 pages)
- INTERFACE UNIT IF-2500 (12 pages)
- GP-31 (2 pages)
- GP-33 (98 pages)
- GP-7000 (28 pages)
- GP-7000 (2 pages)
- GP37 (2 pages)
- GP-90 (36 pages)
- CI-35 (69 pages)
- GP-1850DF (63 pages)
- GP-1850F (110 pages)
- GP-30 (2 pages)
- FCV-30 (110 pages)
- BACK GP-80 (103 pages)
- LC-90 MARK-II (2 pages)
- GP-1650W (44 pages)
- DD-80 (119 pages)
- RP-250 (73 pages)
- GP-1650 (94 pages)
- GP-185F (4 pages)
- GP-1600F (97 pages)
- GP-1850D (94 pages)
- GP-7000F (132 pages)
- GP-7000F (52 pages)
- GP-36 (81 pages)
- GP-150-DUAL (123 pages)
- GP-80 (37 pages)
- 1650WDF (4 pages)