Furuno GP-3500F - Manual (Page 28)

1. BASIC OPERATION
1-18
For example, press the [8] key to display the PLOTTER SETUP menu.
8. PLOTTER SETUP
TURN KNOB TO SELECT MENU.
SELECT THE ITEM OF EACH MENU BY TRACKBALL.
LORAN-A GRI 00-01
CORRECTION 1 +000.0
µ
s
CORRECTION 2 +000.0
µ
s
LORAN-C GRI 00:11-29
CORRECTION 1 +000.0
µ
s
CORRECTION 2 +000.0
µ
s
DECCA CHAIN 01 R-G
CORRECTION 1 +00.00 LANE
CORRECTION 2 +00.00 LANE
TD DISPLAY 1. LORAN-A 2. LORAN-C 3. DECCA
RESET TRIP LOG 1. YES 2. NO
PLOTTER RANGE SETUP 1. YES 2. NO
PANEL-DIMMER 1 2 3 4 5 6 7 8
HUE 1. DAY 2. NIGHT 3. TWILI 4. MANUAL
00:1L0 01:1L1 02:1L4 03:1L5 04:1L6
05:1L7 06:1S1 07:1S2 08:1S3 09:1S4
10:1S6 11:2H3 12:2H4 13:2H5 14:2H6
15:2S0 16:2S1 17:2S2 18:2S3 19:2S4
20:2S5 21:2S6 22:2S7
Cursor (red rectangle)
Plotter setup menu
3. Rotate the [ENTER] knob to select item which you want to change the setting.
You can also select item by rolling the trackball in up-down direction.
4. Roll the trackball in left-right direction to select option (with the red rectangle).
When the option is prefixed with numeral, you can select it by pressing the
appropriate numeric key. In this manual selection by numeric key is used when
both selection methods are available.
5. Press the [MENU] key several times to close the menu.