Furuno GP-3500F - Manual (Page 121)

9. CUSTOMIZING YOUR UNIT
9-7
9.2 PLOTTER SETUP Menu
The PLOTTER SETUP menu mainly sets up the Loran (Decca) TD display. (For
panel dimmer and hue, see section 1.4.)
9.2.1 Setting TD display
To display own ship’s position in TDs in the data window, follow the procedure
below. For how to set the data window, see paragraph 9.6.2.
Displaying position in Loran A
1. Press the [MENU] key to show the main menu.
2. Press the [8] key to show the PLOTTER SETUP menu.
LORAN-A GRI 00-00
CORRECTION 1 +000.0 ms
CORRECTION 1 +000.0 ms
LORAN-C GRI 00-00
CORRECTION 1 +000.0 ms
CORRECTION 1 +000.0 ms
DECCA CHAIN 00 R-G
CORRECTION 1 +000.0 ms
CORRECTION 1 +000.0 ms
TD DISPLAY 1. LORAN-A 2. LORAN-C 3. DECCA
RESET TRIP LOG 1. YES 2. NO
PLOTTER RANGE SETUP 1. YES 2. NO
PANEL DIMMER 1 2 3 4 5 6 7 8
HUE 1. DAY 2. NIGHT 3. TWILI 4. MANUAL
00:1L0 01:1L1 02:1L4 03:1L5 04:1L6
05:1L7 06:1S1 07:1S2 08:1S3 09:1S4
10:1S6 11:2H3 12:2H4 13:2H5 14:2H6
15:2S0 16:2S1 17:2S2 18:2S3 19:2S4
20:2S5 21:2S6 22:2S7
8. PLOTTER SETUP
TURN KNOB TO SELECT MENU.
SELECT THE ITEM OF EACH MENU BY TRACKBALL.
Plotter setup menu
3. Rotate the [ENTER] knob to select LORAN-A GRI to show the station codes
in the menu.
4. Use the numeric keys to enter GRI code.